Updated: Mar 25, 2023 | ETFE Resins, Blog, ETFE film
Created in 1972 by AGC, Fluon® ETFE high-performance fluoropolymer resins have been used in hundreds of different applications worldwide including tubing, piping, wire/cable coatings, hoses, architectural films, valves and other components. When made with ETFE melt-processable resins or films, these components are physically tough and able to withstand extreme conditions, chemicals, UV and weather. For…
Updated: Mar 25, 2023 | Blog, Silicas
Water-in-oil (W/O) sunscreens have always been an industry challenge because achieving the required SPF with minerals created a greasy, unappealing product. AGC and its partner ACT Solutions have succeeded in creating effective mineral formulations without these aesthetic problems. Adding SOLESPHERE™ porous and nonporous silica gels to formulations makes it possible to produce sunscreens and makeup with…
Updated: Mar 25, 2023 | Blog, Fluorosolvents
Precision cleaning is frequently defined as the removal of particles less than a micron. This cleaning is required prior to assembly to ensure the safety and integrity of technically sophisticated parts and components. These include parts used in the automotive, aerospace, medical and electronics industries that could impact product performance if not properly decontaminated. In…
Updated: Mar 25, 2023 | Blog, Fluoropolymer coatings
Components inside devices can corrode when exposed to contaminants and moisture. This corrosion can reduce electronic performance and cause electrical shorts and device failure. Manufacturers use specialized coatings to protect these sensitive components. Factors to consider when selecting coating materials for electronics are the service environment, the component’s life span and the cost of the…
Updated: Mar 25, 2023 | Blog, Fluorosolvents, Silicas
We are excited to announce two new partnerships, allowing for greater distribution of our product lines. Chem Logic to promote and provide technical support for fluorosolvents for high-reliability cleaning applications Our strategic partnership with Chem Logic as an independent sales rep will help sell our environmentally friendly and nonhazardous fluorinated solvents to high-reliability parts manufacturers…
Updated: Mar 25, 2023 | Blog, Automotive products, ETFE film, ETFE Resins, Fluoropolymer compounds, PTFE resins, compounds and micropowders
(AGCCA) has opened a new office in Cupertino, California, to support the advanced materials needs of semiconductor and electronics manufacturers located on the northern West Coast. The Business Development Office Chemicals (BDOC) will enable the company to build and enhance relationships in the region…relationships with customers, partners and technology associations and organizations. The office will…
Updated: Mar 17, 2023 | Fluoropolymer coatings, FEVE Resins, Products for Buildings, Structures and Architecture
It’s always been a major challenge to protect buildings and public infrastructure from nature’s elements. Take bridges, for example. According to the 2021 Infrastructure Report Card, 42% are at least 50 years old and 7.5% of the U.S.’s 617,000 bridges are “structurally deficient,” meaning they are in poor condition. AGC formulators continually strive to develop resins…
Updated: Mar 17, 2023 | Automotive products, Fluoropolymer compounds
New fluoropolymer compounds for flat wire jackets enable automakers to move away from traditional rounded wires and reach 96 percent occupancy. Electric vehicle manufacturers are persistently working to develop ways to improve engine performance, raise output density, increase motor efficiency output and make better use of space. Space utilization is particularly important with wiring. The…
Updated: Mar 17, 2023 | Automotive products, Ionomer dispersions
Envision a car or truck that performs the same as a conventional vehicle, but its fuel tank can be filled in less than five minutes, it can travel 300-400 miles on a tank, and emits nothing into the atmosphere but water vapor. That’s a fuel cell vehicle (FCV), and it’s a growing market – particularly…
Updated: Mar 17, 2023 | Automotive products, Fluoroelastomers
Electric vehicles use high-voltage cables to transmit electrical power to the charging port, battery, engine and other internal components. The automotive industry requires these cables to be lightweight to improve vehicle efficiency and all-electric range. These engines are very hot and contain harsh chemicals. An advanced insulation material is needed to protect cables from this…
Page 4 of 10« First«...23456...10...»Last »